10 Creative DIY Projects You Can Do With a Table Saw
A table saw is almost a must-have for every DIY project. This is also the smartest way to cut wood into desired shapes. It does not matter whether you have experience or not; the table saw is an easy tool to use even for novices. Because of its versatility, you will find it effective in every DIY project.
Table saws have four major types: portable table saw, contractor table saw, cabinet table saws, and hybrid table saws. Before you buy a table saw, you should look for some parameters like table size, motor power, blade angle, wood router, and fence, among other things. That will help to choose the best tool for your need.
Other than that, for the best creative diy projects, you can choose portable table saws. They are easy to move and operate. Because of small scale needs, portable ones are much more flexible than immovable or stationary ones. Let’s explore some of the creative DIY projects for the home that you can try with a table saw.
Every beginner tests their woodworking skills with a bird feeder. Bird feeder varies in shapes and sizes. You slice and add pieces of wood together to make a simple and attractive cedar bird feeder. Also, you can add plexiglass in the sidewall to see how much seed is left in the feeder.
If you need curves in your plank, then use a miter saw in addition to a table saw. Take it a step further and paint the bird feeder in decorative colours to make the feeder more attractive and durable in all weather conditions. Vibrant colours will also attract more birds too.
- Bread Tray
This is the simplest of all diy projects. Measure the planks and slice them into pieces. You can use waterproof glue to glue them together to the shape you need. Now, clamp the board and use sandpaper for the final finish. You can also make a cutting board in the same way.
- Wooden Sofa Sleeve Cup Holder
This is another useful and straightforward DIY project. Measure the size of your sofa arm and slice woods into three different pieces. Now, mark the top piece of the wood and choose the area of the circle. After that, use a pilot drill, and hole saw to make a perfect hole.
It is time to use sandpapers for a smooth finish. Now, join the ⅛ inches plywood piece at one end of the hole. You have to use wood glue for this.. Finally, join all three pieces with pocket screws and glue. You will have a perfect cup holder for your couch.
- Rustic Pot Rack
A rustic pot rack is handy to hang iron pots in a hanging position. This pot rack is built with rough cut cedar and rods. Depending on size and shapes, you can change the styles of this pot rack. All you need is to slice planks in shape and screw iron rods in position according to your design. This gives your kitchen a rustic vibe too.
- Build Coat and Hat Rack
Building a coat and hat rack is very easy with the right woodworking tools. You need to cut lumber to make a rack base. Other than that, cut wood to sizes and drill holes for hooks. Now paint the wood piece and attach hooks. Finally, install the rack on the wall, and you are ready to put your coat or hat on this rack. You get the bragging rights of making possibly the first thing your guests see as they walk in through the doors.
- Rustic Coffee Table
Hardwood tables generally use oak, maple, walnut, or cherry woods. To build a rustic coffee table, you need to measure and cut the wood according to your design. Make sure you start with the tabletop. Put the tabletop together with screws and glue.
After completing the tabletop, prepare its legs and join them with screws to the tabletop. You can now apply sandpaper wash for the perfect finish. If needed, stain it to make it more attractive. You will have a one of a kind coffee table not available in the average furniture store.
- Washer Boxes
This is a popular fun game that most people enjoy at a backyard barbecue. It is more like a horseshoe game where players throw flat washers on the game board. The game board contains two washer pits, each of at least 4 inches in diameter.
The distance of the cup is nearly 25 feet, and you have to throw a washer with three holes of scoring points. Follow some simple steps to build this:
- Measure ¾ inches plywood into 18x48inches dimension. Now, cut them in two different sheets.
- Now cut 2×2 boards with mitered corners for the frame. Now, attach them with 2 inches deck screws.
- It’s time to draw the line at the center of the board and make three different holes.
- Mark the first hole 7 ½ inches, second one at 15 ¾ inches, and the third one at 24 inches from the end.
- Make sure you cut these holes using 4 inches holes. Now cut 3×4 carpets and staple them on the top of the board. Because of the carpet, rings will bounce off easily. Don’t forget to singe the cut end with a flame.
- It’s time to use a utility knife to cut around the holes.
- To the front of each board, attach a bolt eyelet and tie a 10 feet rope between them. Lastly, paint 3-inch washers with different colors, and it’s time to put your game on.
- Book Shelf
This is an option that every beginner should try. You need to measure the planks and cut them into pieces using a table saw. After you finish cutting, join them with glue and screws. Make sure you give it a sandpaper finish before staining.
- Planter Box
Plantar boxes are versatile containers for extensive gardening. You can organize your veggies and edible plants from the decorative flower plants using planters. You can also contain invasive species like mint from taking over by planting them in planters away from your other plants. For planter boxes, it is important to prepare woods beforehand with latex formula. This makes sure that the outdoor moisture does not cause swelling or shrinking of the wood.
After wood preparation, consider its drainage system. So, make some drainage hole in the bottom sheet so that there is no chance of waterlogging in the soil – that will damage your plants. Just like other DIY projects, join the sheets with glue and screws. Lastly, color it and plant the herbs of your choice. You can apply similar techniques to make garden fences as well.
- Wine racks with Glass Storage
Wine lovers love to space saving wine racks to display their collection. It is quite simple to make a wine rack. Measure the width and height of the rack’s location. Now, use a table saw to build its face frame and body. Finally, construct shelves and assemble pieces. Install the unit and store wines on the rack.
A table saw is the most important tool in every DIY project. It gives you more flexibility to experiment with new projects and learn and perfect more skills. Try the ideas and make the most use of a table saw. Time to impress your friends and family with your creations!